Free facial analysis from one photo
This facial analysis reads the whole face at once: face shape, length against width, jaw angle, facial thirds, eye opening and tilt, nose width against the eye gap, symmetry and the golden ratio gap. One dashboard, measured on your device, with a link to the tool that goes deeper on each number.
Front-facing photo, even light, hair off the forehead
Your dashboard appears here: nine readings of the whole face from one photo, each linked to the tool that measures it in depth.
What a facial analysis measures
Each of the tools on this site measures one part of the face in depth. This facial analysis puts their main readings side by side, so you can see the whole face in one place and then open the part you want to look at closely. Every number comes from the same 478 points.
Face shape
The closest of six outlines from length, forehead, cheekbone and jaw widths, and the jaw angle.
Open the face shape detectorFacial thirds
The lower third of the face, nose base to chin, divided by the middle third, brow to nose base.
Open the face proportions guideEyes
How open each eye is, height against width, and the tilt from the inner to the outer corner of each eye.
Open the canthal tilt testNose
Nose width from wing to wing against the gap between the inner eye corners, the canon with the most data behind it.
Open the nose size checkSymmetry
How far 16 mirrored point pairs miss each other, against the photo's own measurement floor.
Open the face symmetry testProportion
The average gap between eight classical ratios and their targets, and which ratios sit furthest away.
Open the golden ratio face test
How to take the photo
- Face the camera straight on, chin level. A turned or tilted head is corrected, but past a limit the page asks for a retake.
- Hold the phone at arm's length or further. Close up, a phone lens makes the nose and the middle of the face look larger.
- Use even light from the front. Strong side light shifts the points along one side and reads as asymmetry.
- Pull hair back off the forehead and temples, so the forehead width is the forehead, not the hairline.
- Keep a neutral expression with the mouth closed. A smile moves the lower third and the jaw corners.
How to read each number
Words like "inside the mid-range" compare a reading with the middle half of our AI-generated test set. That is a rough reference for describing a number, not a population norm and not a beauty standard.
- Length : width
- Face length, including an estimated +12% for the hairline, over cheekbone width. Our test set's middle half runs 1.28-1.36.
- Jaw angle
- The angle at the corner of the jaw. Smaller is a sharper corner; our middle half runs 132.7-135.7°.
- Facial thirds
- Lower third over middle third. 1.00× would be equal; our middle half runs 1.02-1.10×.
- Eye opening
- Eye height over width, placed as a percentile in our measured set, with the span this photo's own noise allows.
- Canthal tilt
- Degrees from inner to outer eye corner, each eye on its own. Above 5° reads positive, below 0° negative.
- Nose width vs eye gap
- 1.00× is the canon. Within 5% counts as about equal; the signed gap shows which side is larger.
- Symmetry offset
- A percentage of face width, placed in our set. Every face has some offset; below the photo's floor it is withheld.
- Golden ratio gap
- An average percentage over eight ratios. A large gap is the normal outcome for real faces, not a defect.
Accuracy and limits
The points are placed on your device from one front photo, so the analysis is only as good as that photo. Head angle is undone before anything is measured, and each photo is measured five times with small shifts to find how much its own points wander. Left-right readings smaller than that wander are withheld rather than printed.
What it cannot do: see the hairline (face length adds an estimate), judge a nose bridge or chin projection (those need a side view), or say anything about skin, expression, or how attractive anyone finds a face. The shape label is the nearest of six prototypes; when two are close both are shown. None of this is a medical or cosmetic assessment.
Your photo stays on this device
The face model downloads once from this site and runs inside your browser tab. Your photo, the points placed on it and every reading on the dashboard stay in memory on this device and are gone when you close the tab. A paid written report is built from measurement numbers only. How privacy works on this site.
Facial analysis questions
What is a face analysis test?
+
A face analysis test measures the geometry of your face from a photo and reports it as numbers: the outline and its length against its width, how the face divides into thirds, the angle of each eye, the width of the nose against the gap between the eyes, how closely the two sides mirror each other and how far a set of classical ratios sits from its targets. This one places 478 points on a front photo inside your browser, straightens the head angle first, and then reads every number from those points. It describes proportion. It does not diagnose anything, it is not a medical or cosmetic assessment, and it does not rate how a face looks. Each reading links to the tool on this site that measures that one thing in more depth.
Is this AI face analyzer free?
+
Yes. The whole dashboard is free, with no account and no upload: the face model downloads once to your browser and the measuring happens on your device. You can run it as often as you like, on as many photos as you like, and on an AI-generated example face if you would rather not use your own. Under the dashboard there is an optional paid report. It turns the same numbers into a written plan for the hair and glasses shapes that suit your measured proportions, with hairstyle try-ons, for one payment that does not renew. Nothing on the free dashboard is held back to push you towards it: every reading this photo can support is printed, and the ones it cannot are marked as withheld with the reason.
How accurate is an online facial analysis?
+
It is as accurate as the photo allows, and the photo moves the numbers more than most people expect. A head turned a few degrees, a slight smile, side lighting or a phone held close to the face all shift landmark ratios. This page corrects head rotation before measuring and measures each photo five times to find its own noise floor, and it withholds a left-right reading when the difference is smaller than that floor. Face length also includes an estimated allowance for the hairline, because the mesh stops below it. The words beside each number compare it with the middle half of an AI-generated test set, which is a rough reference rather than a population norm. Two photos of the same face taken a minute apart can differ slightly, so compare readings across photos rather than trusting one decimal place.
Why does my facial analysis say a reading is not measurable?
+
Because printing a number the photo cannot support would be guessing. Symmetry and canthal tilt are the two readings most easily invented by the photo itself. Each photo is measured five times with tiny shifts, and how far the points move between passes becomes that photo's own measurement floor. If the left-right offset is smaller than the floor, or an eye corner is closer to level than the floor can resolve, the reading is withheld rather than shown. A photo that is slightly sheared, from a wide lens or a screen re-photo, withholds both, because shear manufactures exactly this kind of left-right difference. A sharper, straight-on photo in even light usually brings the withheld readings back. The rest of the dashboard is still measured as normal.
Does a facial analysis tell me if I am attractive?
+
No, and this one does not try. Every reading on the dashboard is a distance or an angle between points on your face, compared with targets or with a reference set, and none of them is a verdict on how you look. Classical targets such as the golden ratio come from drawing conventions, not from research on what people find attractive, and most real faces miss several of them by a wide margin. The research on attractiveness points at averageness, symmetry and sexual dimorphism, and even those explain only part of how people rate faces. If you want a score built from those factors, with its formula and error range published, the attractiveness test on this site does that separately. This page simply shows what your proportions are.
Is my photo uploaded for the facial analysis?
+
No. The face model downloads once from this site and runs inside your browser tab, so the measurement happens on pixels already in your device's memory. The photo, the 478 points and the readings on the dashboard are never sent to a server and are gone when you close the tab. The page counts anonymous steps, such as that a measurement finished, without any number from your face. If you buy the written report, it is built from measurement numbers only, not from the photo. An optional paid visual has its own explicit consent step before any photo is sent anywhere. If you would rather not use a photo of yourself at all, the example button runs the same analysis on an AI-generated face.